Our standard model homes are composed from the elements listed below:

• Standard anti-termite treated base;
• 40 x 60cm foundations;
• Base composed of 2 rows of concrete blocks and 1 row below ground level;
• Hollow block flooring, 12cm reinforced concrete slabs on stone sub-base for the garage;
• External walls in 20cm heavy clay brick with stiffeners and wall ties (2.85 metre masonry levelling course);
• Timber frame truss system, 2, 4 or multiple-sided roof; 
• 30 cm eaves,  fascia board and soffit;
• heavy clay tiles (ridge tile set in mortar) +  ‘curved’ verge tiles;
• Gutters and downpipes in lacquered aluminium;
• Spray rendered, non-smooth rendering;
• Traditional PVC window and door fittings with straight lintels; 4/16/4 low emissivity double glazing;
• Wooden board and batten ‘Z’ style swing shutters  (28cm thick) aluminium rolling shutters with insulation against heat loss, automatic locking, manually-operated, housed in a rolling shutter box;
• Wooden front door;
• Straight anti-intruder window gratings;
• Metal up and over garage door;
• Moulded, pre-painted interior doors with champagne coloured handle; 
• Calibel dry lining, 80mm glass wool (fiberglass)+ 10mm plasterboard;
• 72mm Placostyl with PAR 45mm glass wool internal partition walls, insulated  partition wall and moisture resistant board for the bathroom;
• Ceiling in BA 13 plasterboard;
• Attic space insulation using blown-in glass wool (fibreglass) to a depth of 27.5cm (R-value – 6)
  Electricity and electrical heating systems up to standard RT 2005, high efficiency, electronically commutated motor-driven extraction system (or similar system), superior quality heated towel rail in bathroom;
• 300 litre hot water tank;
• Standard white bathroom suite;
• Top quality, high abrasion resistance stoneware tiles in all habitable rooms (except for bedrooms, where a smooth concrete screed is installed), using the parallel installation method;
• 12m² of earthenware tiling.